Skip to Content
  1. All products
  2. 🧬 Discrete Components
  3. 🔳 ICs, Transistors & Mosfets
  4. 7805 Voltage Regulator IC
  5. 🔳 ICs, Transistors & Mosfets
मूल्य सूची: Retail Price (B2C) मूल्य सूची
मूल्य सूची: Retail Price (B2C) मूल्य सूची
7805 Voltage Regulator IC

7805 Voltage Regulator IC

(0 review)
SpecificationDetails
Output Voltage+5V DC
Output CurrentUp to 1.5A
Input Voltage (Max)35V DC
Dropout Voltage2.0V (Typical)
Package TypeTO-220
Protection FeaturesInternal Thermal Overload & Short Circuit Protection
Price
₹ 12.71 ₹ 12.71
(Tax included)

बारकोड: 1281899

Product Description

The 7805 Voltage Regulator IC is the industry-standard linear regulator for providing a stable, fixed +5V DC output. Part of the iconic 78xx series, it is the most widely used component for powering digital logic circuits, microcontrollers (like Arduino, 8051, and PIC), and USB-based devices from a higher-voltage battery or DC power supply. Housed in the rugged TO-220 package, the 7805 is engineered for reliability, featuring internal current limiting and thermal shutdown circuitry. This makes it an essential building block for any electronics project requiring a clean, noise-free 5V power rail.

Key Features

  • Fixed 5V Regulation: Converts a wide range of input DC voltages into a precise +5V output, perfect for TTL logic and microcontrollers.

  • 1.5A Current Capacity: Capable of delivering up to 1.5 Amperes, sufficient for powering an Arduino along with several sensors and small servos.

  • Thermal Overload Protection: Automatically shuts down the output if the internal temperature exceeds safe limits, preventing the IC from burning out.

  • Short-Circuit Protection: Built-in current limiting safeguards the regulator and your connected components in case of a wiring error.

  • Low Noise Output: Provides a much cleaner signal than most switching regulators (SMPS), making it ideal for sensitive analog-to-digital (ADC) measurements.

Technical Details

  • Operating Temperature: 0°C to +125°C.

  • Storage Temperature: -65°C to +150°C.

  • Pin Configuration: 1: Input, 2: Ground, 3: Output.

Prototyping and Engineering Tips from Robogears

  • The "2V Headroom" Rule: CRITICAL: For the 7805 to function, the input voltage must be at least 2V higher than the output. This means you should provide at least 7V DC to the input pin. However, avoid using very high voltages (like 24V or 35V) if you are drawing high current, as the "dropped" voltage is converted entirely into heat.

  • Essential Capacitors: For a stable output, always place a 0.33µF Ceramic Capacitor on the input pin and a 0.1µF Ceramic Capacitor on the output pin to ground. If your power source is far away, add a 100µF Electrolytic Capacitor at the input to handle current surges.

  • Heatsink is a Must: If you are dropping 12V to 5V at 500mA, the IC is dissipating 3.5 Watts of heat (7V×0.5A). In this scenario, the 7805 will get extremely hot. Always use a TO-220 Aluminum Heatsink with thermal paste for any application drawing more than 200mA.

  • Common Grounding: Ensure Pin 2 (the center pin) is connected to a solid ground plane. If the ground connection is loose or "noisy," the output voltage may oscillate or rise above 5V, potentially damaging your microcontroller.

  • Battery Efficiency Tip: Linear regulators like the 7805 are "inefficient" because they waste excess energy as heat. If you are building a battery-powered project that needs to last for weeks, consider using a high-efficiency Buck Converter instead. For most plug-in or short-term battery projects, the 7805 is the simpler, more reliable choice.

Package Includes

  • 1 x 7805 Voltage Regulator IC (TO-220)

Disclaimer: Product images are shown for illustrative purposes only. The exact branding placement on the metal tab or the finish of the plastic housing may vary slightly between manufacturing batches, but all technical specifications and the 7805 performance standards remain as described.

Safety Warning: Always verify the pinout before soldering to your PCB. Reversed polarity on the input pin will instantly destroy the IC. Ensure the input voltage does not exceed the 35V limit. When mounting to a metal chassis, remember that the metal tab is internally connected to the Ground pin (Pin 2).