Skip to Content
  1. All products
  2. 🧠 Controllers & Systems
  3. 🛸 Drones & Accessories
  4. Landing Gear For SK480 F450 F550 Quadrocopter
  5. 🛸 Drones & Accessories
मूल्य सूची: Retail Price (B2C) मूल्य सूची
मूल्य सूची: Retail Price (B2C) मूल्य सूची
Landing Gear For SK480 F450 F550 Quadrocopter

Landing Gear For SK480 F450 F550 Quadrocopter

(0 review)
SpecificationDetails
Height~150 mm to 190 mm (Extended)
MaterialHigh-Quality ABS / Nylon Plastic
CompatibilityF450, F550, SK480, and similar DJI-style frames
Weight~20g per leg (approx. 80g-90g for full set)
MountingM3 Screw Mounting Holes
ColorWhite
Price
₹ 220.34 ₹ 220.34
(Tax included)

बारकोड: 3781

Product Description

The High Landing Gear for F450 / F550 / SK480 is a essential upgrade for drone pilots looking to increase ground clearance on their multirotor platforms. Specifically designed for the popular DJI-style flame wheels and carbon fiber equivalent frames, these extended legs raise the drone significantly higher than stock landing skids. This added elevation is crucial for protecting expensive bottom-mounted equipment such as 2-axis or 3-axis camera gimbals, battery packs, and specialized sensors during takeoff and landing. Constructed from impact-resistant nylon-plastic, these legs are engineered to absorb the shock of hard landings while remaining lightweight to minimize impact on flight battery life.

Key Features

  • Extended Ground Clearance: Provides ample room for mounting professional-grade gimbals (like Zenmuse or Tarot) and large-capacity 3S/4S LiPo batteries underneath the frame.

  • Universal Fitment: Features pre-drilled mounting slots that align perfectly with the arms of standard F450 Quadcopter and F550 Hexacopter frames.

  • High Impact Absorption: The flexible yet rigid plastic design acts as a mechanical buffer, preventing energy from a rough landing from transferring directly to the flight controller and motors.

  • Aerodynamic Profile: Curved leg geometry reduces wind resistance during high-speed forward flight, maintaining drone stability.

  • Lightweight Durability: Optimized to provide maximum height without adding significant rotational inertia to the craft.

Technical Details

  • Quantity: Sold as a set (typically 4 legs).

  • Screw Compatibility: Compatible with standard M3x8mm or M3x10mm socket head screws.

  • Finish: Smooth matte white finish.

Prototyping and Engineering Tips from Robogears

  • Gimbal Protection: CRITICAL: If you are using a 3-axis gimbal, measure the total height of the gimbal including the camera. This landing gear provides roughly 15-18cm of clearance. Ensure your camera lens has at least a 2cm "buffer" from the ground to prevent dust or pebbles from scratching the optics during motor initialization.

  • Vibration Dampening: For heavy-lift F550 builds, you can add small strips of adhesive-backed Silicon Foam or rubber to the bottom of the "feet." This further reduces the "bounce" during landing and helps prevent the drone from sliding on smooth surfaces like tiles or asphalt.

  • Weight Distribution: Adding high landing gear shifts the "Center of Gravity" (CoG) slightly lower. This can actually improve flight stability in hovering, but if you mount a heavy battery at the very bottom, ensure your PID settings in Mission Planner or Betaflight are adjusted to account for the new "Pendulum Effect."

  • Mounting Security: Use a small drop of Blue Threadlocker on the mounting screws. The high-frequency vibrations from 10-inch propellers can eventually vibrate these screws loose, causing a leg to dangle mid-flight.

  • Compass Interference: Since these are plastic, they do not interfere with the internal or external GPS compass. However, avoid running high-current ESC wires directly alongside the legs if you plan to mount a magnetometer near the base.

Package Includes

  • 4 x High Landing Gear Legs (White)

  • Mounting Hardware (Screws)

Disclaimer: Always check for cracks or stress fractures in the plastic after a crash. A compromised landing leg can collapse during the next landing, causing the drone to tip over and damage the propellers. Ensure all screws are tight but do not over-torque, as this may crack the plastic mounting flange. Not recommended for drones with an All-Up-Weight (AUW) exceeding 3kg.