Skip to Content
  1. All products
  2. Switches
  3. KW11-3Z Micro Switch with Roller Lever - 5A 250V AC SPDT Limit Switch for 3D Printers, CNC Endstops, and Robotics Security
  4. Switches
मूल्य सूची: Retail Price (B2C) मूल्य सूची
मूल्य सूची: Retail Price (B2C) मूल्य सूची
KW11-3Z Micro Switch with Roller Lever - 5A 250V AC SPDT Limit Switch for 3D Printers, CNC Endstops, and Robotics Security

KW11-3Z Micro Switch with Roller Lever - 5A 250V AC SPDT Limit Switch for 3D Printers, CNC Endstops, and Robotics Security

(0 review)
FeatureDetails
Model NumberKW11-3Z (with Roller Lever)
Contact TypeSPDT (Single Pole Double Throw)
ActionMomentary (Snap Action)
Current Rating5A 250V AC / 10A 125V AC
Pin Configuration3-Pin (COM, NO, NC)
Actuator TypeLong Lever with Roller
Price
₹ 33.90 ₹ 33.90
(Tax included)

Product Description The KW11-3Z Micro Switch is a high-precision snap-action switch designed for detection and limit-sensing applications. Equipped with a Roller Lever, it is specifically engineered to reduce friction when a moving part (like a 3D printer carriage or CNC gantry) triggers the switch. This switch is a staple component for the maintenance team at Robogears Pvt Ltd, serving as a reliable "Endstop" to prevent mechanical over-travel. Its 3-pin SPDT configuration allows it to be wired as either "Normally Open" (completes a circuit when hit) or "Normally Closed" (breaks a circuit when hit), providing maximum flexibility for safety interlocks.

Key Highlights

  • Reduced Mechanical Wear: The integrated roller tip allows for smooth activation from various angles, minimizing the lateral force on the switch arm compared to flat-lever versions.

  • Snap-Action Precision: Features a high-quality internal spring that ensures a rapid transition between contacts, providing a clean digital signal and preventing electrical arcing.

  • 5A High-Load Rating: While often used for low-voltage logic (3.3V/5V), its industrial 5A rating makes it capable of directly switching small AC/DC motors or solenoids.

  • Versatile 3-Pin Logic: Provides three terminals—Common (COM), Normally Open (NO), and Normally Closed (NC)—enabling a wide range of safety and automation logic.

  • Standard Mounting Holes: Features two pre-drilled holes in the body for secure M2 or M2.5 screw mounting to a machine frame.

Technical Specifications

  • Contact Resistance: 30$ 

  • Insulation Resistance: 100

  • Dielectric Strength: 1000V AC for 1 minute

  • Mechanical Life:  1,000,000 Cycles

  • Operating Force: ~0.5N to 1.5N

  • Housing Material: High-durability phenolic or PBT plastic

Prototyping & Installation Tip

Wiring for 3D Printers & CNC (Pimpri Workshop Standard):

  1. COM (Bottom/Pivot Pin): Connect to your Signal Ground (GND).

  2. NC (Top Pin): Connect to your Limit Switch Input. Note: Using the "Normally Closed" (NC) terminal is a safety standard. If a wire breaks or comes loose, the machine will register a "Triggered" state and stop, preventing a crash.

Mounting Strategy: Ensure the roller is positioned so the moving part hits it tangentially (sliding across the roller) rather than head-on. This preserves the life of the lever arm and provides the most repeatable trigger point for high-precision homing sequences.

Note: This product is a Pack of 2 Micro Switches. Product images are for illustration purposes only.