Skip to Content
  1. All products
  2. 🧠 Controllers & Systems
  3. 🛸 Drones & Accessories
  4. APM 2.8 ArduPilot Flight Controller with Integrated Compass
  5. 🛸 Drones & Accessories
मूल्य सूची: Retail Price (B2C) मूल्य सूची
मूल्य सूची: Retail Price (B2C) मूल्य सूची
APM 2.8 ArduPilot Flight Controller with Integrated Compass

APM 2.8 ArduPilot Flight Controller with Integrated Compass

(0 review)
SpecificationDetails
MicroprocessorATMEGA2560 (Main) & ATMEGA32U-2 (USB)
Input Voltage12V - 16V DC
Internal Sensors3-axis Gyro, Accelerometer, Magnetometer, Barometer
Data LoggingOnboard 4MB Dataflash Chip
InterfaceUART, I2C, SPI, and 8 PWM Output Channels
Voltage RegulatorLP2985-3.3 (Up to 16V input tolerance)
Price
₹ 3,813.56 ₹ 3,813.56
(Tax included)

बारकोड: 59301084

Product Description

The APM 2.8 is a complete open-source autopilot system. It features a powerful ATmega2560 CPU and allows for fully autonomous flight, including missions with programmed waypoints via the Mission Planner software. The board includes a dedicated I2C port for external sensors and high-speed Dataflash for storing flight logs, which is essential for post-flight analysis and tuning.

Key Features

  • Flexible Compass Options: Features a built-in compass for simple builds, but allows you to disable it via a jumper to use a GPS-mounted external compass for better accuracy and less interference.

  • Autonomous Missions: Supports sophisticated flight modes like Auto, Loiter, Return-to-Launch (RTL), and Waypoint Navigation.

  • Robust Connectivity: Includes dedicated ports for GPS, Telemetry, and OSD (On-Screen Display), making it a central hub for your drone’s electronics.

  • Onboard Datalogging: The 4MB Dataflash chip records flight data in real-time, allowing you to troubleshoot and refine your drone's performance.

  • Proven Stability: Uses high-quality MEMS sensors (Gyro/Acc/Baro) to provide stable flight even in challenging wind conditions.

Technical Details

  • Dimensions: 70mm x 45mm x 13.5mm.

  • Weight: ~28g (with plastic case).

  • Firmware: ArduPilot (MegaPirateNG compatible).

Prototyping and Engineering Tips from Robogears

  • Compass Jumper Setting: If you are using an external GPS with a built-in compass, you must remove the "MAG" jumper on the APM 2.8 board. Leaving it on will cause a conflict between the internal and external compasses, leading to "bad compass health" errors.

  • Powering Safely: It is highly recommended to power the APM 2.8 using a Power Module. This provides a clean, regulated 5.3V supply and allows the board to monitor your battery's voltage and current consumption in real-time.

  • Vibration Isolation: Like all flight controllers with a barometer and accelerometer, the APM 2.8 is sensitive to vibration. Use a Flight Controller Anti-Vibration Set to prevent "altitude hold" issues.

  • Firmware Note: The APM 2.8 uses an 8-bit processor. While it is extremely capable, it is at the "end of life" for new ArduPilot features. For the best experience, use ArduCopter version 3.2.1, which is the most stable and feature-complete version for this specific hardware.

Package Includes

  • 1 x APM 2.8 Flight Controller (with protective plastic case)

  • 5 x JR Male-to-Male Jumper Wires (for receiver connection)

Disclaimer

This is a sophisticated autopilot system. Beginners should spend time reading the ArduPilot documentation and using the Mission Planner setup wizards to ensure a safe first flight.