Skip to Content
  1. All products
  2. 🧠 Controllers & Systems
  3. 🖥️ Displays & Display Modules
  4. 0.56" Red 2-Digit 7-Segment LED Display (Common Cathode)
  5. 🖥️ Displays & Display Modules
मूल्य सूची: Retail Price (B2C) मूल्य सूची
मूल्य सूची: Retail Price (B2C) मूल्य सूची
0.56" Red 2-Digit 7-Segment LED Display (Common Cathode)

0.56" Red 2-Digit 7-Segment LED Display (Common Cathode)

(0 review)
SpecificationDetails
Digit Height0.56 Inch (14.22 mm)
Digit Count2 Digits
ConfigurationCommon Cathode (CC)
Emitting ColorHigh-Intensity Red
Forward Voltage1.8V to 2.2V per segment
Forward Current15mA to 20mA per segment
Package Type18-Pin DIP (Typically 10 active pins)
Price
₹ 33.90 ₹ 33.90
(Tax included)

Product Description

The 0.56" 2-Digit Display is designed for multiplexed operation. While it has 18 physical pin slots, it typically uses only 10 pins to control all 14 segments and 2 decimal points. The two digits share the same segment pins (A-G and DP), but have independent common cathode pins. This allows you to control 16 individual LEDs using very few microcontroller pins, making it perfect for percentage indicators, channel numbers, or simple countdown timers.

Key Features

  • Excellent Contrast: Features a black surface with white segments that turn bright red when powered, ensuring clear visibility in indoor environments.

  • Multiplex Friendly: Optimized for rapid switching between digits, allowing for a flicker-free dual-number display using simple code.

  • Compact Footprint: Small enough to fit into handheld devices or small control panels where a 3 or 4-digit display would be too large.

  • Standard 2.54mm Pitch: Fits easily into standard breadboards and perf-boards, simplifying the prototyping phase.

  • High Reliability: Solid-state LED technology provides a long operational life with consistent brightness across both digits.v

Technical Details

  • Dimensions: Approximately 25mm x 19mm.

  • Operating Temperature: -25°C to +85°C.

  • Peak Wavelength: 635nm (Red).

Prototyping and Engineering Tips from Robogears

  • Current Limiting: Always use current-limiting resistors (220Ω to 470Ω) on the segment pins (A-G). Without them, the LEDs will draw too much current and burn out or damage your Arduino pins.

  • Common Cathode Logic: To light up a segment, connect the Common Digit Pin to Ground and pull the specific Segment Pin (A-G) High (3.3V or 5V).

  • Ghosting Prevention: When multiplexing (switching between the tens and units digit), ensure you turn off all segments for a tiny fraction of a millisecond (blanking) before switching to the next digit. This prevents "ghosting" where the number from one digit faintly appears on the other.

  • Pin Mapping: Since these displays come in various internal wiring configurations, use a 3V coin cell battery or a multimeter in "Diode Test" mode to manually verify which pins correspond to which segments before soldering.

Package Includes

  • 1 x 0.56" Red 2-Digit 7-Segment LED Display (Common Cathode)

Disclaimer

Ensure you have confirmed your project requires a Common Cathode display. Using Common Anode code with this hardware will result in the display not functioning.