Skip to Content
  1. All products
  2. 🧠 Controllers & Systems
  3. 📡 Sensors & Modules
  4. Active Buzzer Alarm Module – 3.3V to 5V DC Low-Level Trigger for Arduino, Raspberry Pi & Microcontrollers
  5. 📡 Sensors & Modules
मूल्य सूची: Retail Price (B2C) मूल्य सूची
मूल्य सूची: Retail Price (B2C) मूल्य सूची
Active Buzzer Alarm Module – 3.3V to 5V DC Low-Level Trigger for Arduino, Raspberry Pi & Microcontrollers

Active Buzzer Alarm Module – 3.3V to 5V DC Low-Level Trigger for Arduino, Raspberry Pi & Microcontrollers

(0 review)
FeatureDetails
TypeActive (Internal Oscillation)
Operating Voltage3.3V to 5V DC
Trigger TypeLow-Level Trigger (Typically)
Transistor DriverS8550 Onboard
Sound Output≥ 85dB at 10cm
Pins3-Pin (VCC, GND, I/O)
Price
₹ 38.14 ₹ 38.14
(Tax included)

बारकोड: 59305

Product Description The Active Buzzer Alarm Module is an easy-to-use audio signaling device designed for rapid integration into microcontroller projects. Unlike passive buzzers that require a complex PWM frequency to produce sound, this "Active" version features its own internal oscillation source. Simply applying power and a Low-Level signal (Ground) will trigger a consistent, high-decibel beep. The module is built around a S9012 PNP transistor driver, which allows high-current sound production while protecting your Arduino or ESP32 pins from excessive load. It is an ideal solution for audible feedback, alarm systems, and notification alerts in DIY electronics and industrial prototypes.

Key Features

  • Active Internal Oscillator: Produces a constant 2.5kHz tone automatically without needing complex software-generated frequencies.

  • Low-Level Trigger Logic: Activated when the signal pin is pulled to Ground (0V), making it compatible with various sensor outputs and microcontrollers.

  • On-board Transistor Driver: Uses a 9012 transistor to amplify the signal, ensuring the buzzer gets full power without straining the MCU pins.

  • Dual Voltage Compatibility: Operates reliably on both 3.3V and 5V power rails, suitable for Raspberry Pi and Arduino alike.

  • Plug-and-Play Design: Features standard 2.54mm pitch headers and a pre-soldered PCB for instant breadboard connectivity.

Technical Details

  • Sound Generation Mechanism: Piezoelectric diaphragm driven by an internal multi-vibrator circuit for consistent output.

  • Triggering Logic (PNP): The module uses a PNP transistor; when the I/O pin outputs "LOW," the transistor conducts and powers the buzzer.

  • Acoustic Pressure: Delivers a clear, penetrating sound rated at ~85dB at a 10cm distance.

  • Operating Current: Draws between 20mA and 30mA during activation, which is safely managed by the onboard transistor.

  • Quiescent Current: Draws negligible power when the trigger pin is High or floating.

  • Pin Configuration: Standard 3-wire interface: VCC (3.3V-5V), GND, and I/O (Signal).

  • Signal Polarity: A "HIGH" logic level on the I/O pin keeps the buzzer silent; a "LOW" level activates the alarm.

  • Mounting Versatility: Includes a single M3 mounting hole for secure attachment to robotic chassis or project boxes.

  • Tone Profile: Produces a single-frequency continuous beep; to create pulses, simply toggle the I/O pin in your code.

  • Driver Protection: The PCB design isolates the inductive load of the buzzer from the signal source.

  • Atmospheric Resistance: Encased in a durable black PBT plastic housing for mechanical protection.

  • PCB Finish: High-quality green solder mask with gold-plated pads for excellent conductivity.

  • Response Time: Near-instantaneous activation (microseconds) upon receiving the trigger signal.

  • Logic Compatibility: TTL and CMOS compatible; works directly with 3.3V ESP32/Raspberry Pi and 5V Arduino Uno/Mega.

  • Frequency Stability: Maintains a stable 2300Hz-2700Hz pitch regardless of minor voltage fluctuations within the 3V-5V range.

Prototyping and Engineering Tips from Robogears

  • 9V Battery Use: Do not connect a 9V battery directly to the VCC pin. This module is rated for a maximum of 5.5V. Use a 7805 Voltage Regulator to step down the power or connect it to the 5V pin of your Arduino.

  • 18650 Cell: A single 18650 cell (3.7V) is a perfect power source. Since the module works down to 3.3V, it will provide a loud and consistent alarm even as the battery discharges.

  • IC & Capacitor Tip: If you are using this alongside sensitive sensors, add a 0.1uF ceramic capacitor across the buzzer's power rails. Buzzers can introduce minor electrical noise that might interfere with high-precision analog readings.

  • Related Products: We recommend pairing this with our Ultrasonic Sensors (HC-SR04) for reverse parking alarms or PIR Motion Sensors for home security prototypes.

Package Includes

  • 1 x Active Buzzer Alarm Module (Low Level Trigger).

Disclaimer Image is for illustration purpose only 2-3 lines. Do not cover the small hole on top of the buzzer housing, as this is the sound outlet. Obstructing it will significantly reduce the volume and may cause internal pressure buildup.