Skip to Content
  1. All products
  2. 🧬 Discrete Components
  3. 🔳 ICs, Transistors & Mosfets
  4. A1015 PNP Transistor ( Pack of 3 )
  5. 🔳 ICs, Transistors & Mosfets
मूल्य सूची: Retail Price (B2C) मूल्य सूची
मूल्य सूची: Retail Price (B2C) मूल्य सूची
A1015 PNP Transistor ( Pack of 3 )

A1015 PNP Transistor ( Pack of 3 )

(0 review)
SpecificationDetails
Transistor PolarityPNP
Package TypeTO-92
Collector-Base Voltagage-50V
Collector-Emitter Voltage -50V
Collector Current -150mA
DC Current Gain 70 to 400 (Classification Dependent)
Transition Frequency 80 MHz (Minimum)
Price
₹ 8.47 ₹ 8.47
(Tax included)

बारकोड: 7334944

Product Description

The A1015 is a classic PNP epitaxial silicon transistor designed for high-fidelity audio frequency amplification and high-speed switching. It is widely recognized for its low noise figure and excellent linearity, making it a staple in pre-amplifier circuits and signal-processing applications. As a PNP device, it is often used for high-side switching or as the complementary partner to the C1815 NPN transistor. Housed in a compact TO-92 package, it provides a reliable and cost-effective solution for low-power electronic designs, educational kits, and consumer electronics repair.

Key Features

  • Low Noise and High Linearity: Specifically engineered to minimize distortion in audio stages, ensuring clear signal reproduction.

  • Complementary Pairing: Designed to work seamlessly with the C1815 NPN transistor for push-pull amplifier configurations.

  • High Voltage Rating: With a 50V $V_{CEO}$, it handles higher rail voltages than many other small-signal PNP transistors.

  • Fast Switching: A transition frequency of 80 MHz allows for effective use in pulse-handling and high-speed digital logic circuits.

  • Standard TO-92 Package: The through-hole design is ideal for breadboarding, hobbyist projects, and easy PCB mounting.

Technical Details

  • Power Dissipation ($P_C$): 400mW.

  • Emitter-Base Voltage ($V_{EBO}$): -5V.

  • Operating Junction Temperature: -55°C to +150°C.

Prototyping and Engineering Tips from Robogears

  • Pinout Sequence: CRITICAL: When viewing the flat side of the A1015 with the leads pointing down, the pinout is Emitter (1), Collector (2), and Base (3). Note that this often differs from European or American standard transistors like the BC557 or 2N3906; always verify your PCB layout to prevent reverse connection.

  • PNP Switching Logic: Since this is a PNP transistor, it is "turned on" when the base voltage is lower than the emitter voltage. In common switching circuits, the emitter is connected to the positive rail, and the base is pulled toward ground (through a resistor) to activate the load.

  • Audio Pair Balancing: For high-quality stereo amplifiers, try to match the gain (hFE​) of the A1015 with its NPN counterpart (C1815). Transistors from the same gain group (marked with letters like O, Y, or G) will provide better circuit symmetry and lower distortion.

  • Thermal Considerations: While rated for 400mW, it is best to operate the device below 60% of its maximum capacity for long-term reliability. If the case becomes hot during use, check for excessive collector current or consider a larger package like TO-126.

  • Base Protection: Always include a series resistor (typically 1kΩ to 10kΩ) at the base to limit current. Directly connecting the base to a low-impedance voltage source can cause thermal runaway and permanent junction failure.

Package Includes

  • 3 x A1015 PNP Audio Frequency Amplifier Transistors

Disclaimer: Product images are shown for illustrative purposes only. The exact markings on the transistor body or the manufacturer's logo may vary slightly between manufacturing batches, but all technical specifications and A1015 performance standards remain as described.

Safety Warning: Do not exceed the -150mA collector current limit. When driving inductive loads such as small relays, always use a Flyback Diode in parallel with the load to prevent high-voltage spikes from damaging the transistor's junction.