Skip to Content
  1. All products
  2. 🧠 Controllers & Systems
  3. 📡 Sensors & Modules
  4. CP2102 USB to TTL Serial Converter Module (6-Pin)
  5. 📡 Sensors & Modules
मूल्य सूची: Retail Price (B2C) मूल्य सूची
मूल्य सूची: Retail Price (B2C) मूल्य सूची
CP2102 USB to TTL Serial Converter Module (6-Pin)

CP2102 USB to TTL Serial Converter Module (6-Pin)

(0 review)
SpecificationDetails
Main ChipSilicon Labs CP2102
Output VoltageDual: 3.3V and 5V DC
Baud Rates300 bps to 1 Mbps
USB InterfaceUSB 2.0 Full Speed (12 Mbps)
Standard PinsDTR, RXD, TXD, VCC, CTS, GND
Operating Temp-40°C to +85°C
Onboard ProtectionIntegrated self-recovery fuse
Price
₹ 152.54 ₹ 152.54
(Tax included)

Product Description

The CP2102 Module is engineered to be more robust and reliable than cheaper CH340 or PL2303 alternatives. It includes an integrated USB transceiver, a crystal oscillator, and an EEPROM for storing device information—all within a single chip. The module features six output pins, including the critical DTR pin, which enables the "Auto-Reset" function required for programming Arduino boards without a built-in USB port. Its compact size and clear pin labeling make it a staple for any electronics workbench.

Key Features

  • Dual Power Output: Provides both 3.3V and 5V power rails, allowing you to power and program various logic-level devices directly from the USB port.

  • Hardware Handshaking: Supports CTS and RTS signals for advanced serial communication protocols and industrial debugging.

  • Automatic Reset (DTR): Facilitates hands-free firmware flashing; no need to manually press the reset button on your microcontroller during an upload.

  • Stable Drivers: Silicon Labs provides officially signed drivers for Windows (7/8/10/11), macOS, and Linux, ensuring a "plug-and-play" experience.

  • Safety First: Includes a self-resetting fuse to protect your computer's USB port from accidental short circuits on the target board.

Technical Details

  • Dimensions: 26.5mm x 15.6mm.

  • LED Indicators: Onboard Transmit (TX) and Receive (RX) LEDs flash during data transfer for easy visual debugging.

  • Connector: Standard USB Type-A.

Prototyping and Engineering Tips from Robogears

  • RX to TX Rule: When wiring this to your microcontroller, remember the Cross-Over Rule: The TXD (Transmit) pin of the CP2102 must go to the RX (Receive) pin of your microcontroller, and vice versa. Connecting TX to TX will result in a communication failure.

  • Driver Installation: If your computer does not recognize the module as a "Silicon Labs CP210x USB to UART Bridge," you will need to download and install the official drivers from the Silicon Labs website. This is a one-time setup.

  • Programming Pro Minis: To program an Arduino Pro Mini, connect the DTR pin of the CP2102 to the DTR (or GRN) pin of the Pro Mini. This allows the Arduino IDE to reset the chip at the exact moment the upload starts.

  • Baud Rate Stability: While some converters glitch at higher speeds, the CP2102 is exceptionally stable at 115,200 baud and above. If you are experiencing "garbage" characters in your Serial Monitor, ensure that the baud rate in your code matches the baud rate selected in your terminal software.

Package Includes

  • 1 x CP2102 USB to UART TTL Serial Converter Module

  • 5 x Female-to-Female Jumper Wires (typically included)

Disclaimer

Always verify the logic level of your target device. While the module provides 5V power, ensure you use the 3.3V pin for ESP8266 or other 3.3V-only microcontrollers to avoid damaging the logic pins.