Skip to Content
  1. All products
  2. 🧠 Controllers & Systems
  3. 📡 Sensors & Modules
  4. Capacitive Soil Moisture Sensor v2.0 – Corrosion-Resistant Analogue Humidity Sensor for Arduino & Smart Gardening
  5. 📡 Sensors & Modules
मूल्य सूची: Retail Price (B2C) मूल्य सूची
मूल्य सूची: Retail Price (B2C) मूल्य सूची
Capacitive Soil Moisture Sensor v2.0 – Corrosion-Resistant Analogue Humidity Sensor for Arduino & Smart Gardening

Capacitive Soil Moisture Sensor v2.0 – Corrosion-Resistant Analogue Humidity Sensor for Arduino & Smart Gardening

(0 review)
FeatureDetails
TechnologyCapacitive Sensing (Corrosion-Resistant)
Operating Voltage3.3V to 5.5V DC
Output TypeAnalog Voltage
ConnectorPH2.0-3P (3-Pin)
InterfaceVCC, GND, AOUT
Dimensions98mm x 23mm
Price
₹ 59.32 ₹ 59.32
(Tax included)

बारकोड: 9851247

Product Description The Capacitive Soil Moisture Sensor v2.0 is a premium, corrosion-resistant solution for monitoring soil hydration in smart gardening and automated irrigation systems. Unlike traditional resistive sensors that use exposed metal probes subject to electrolysis and rust, this version utilizes capacitive sensing technology. This means the sensing elements are embedded within the PCB layers, isolated from direct contact with the soil and water. This design ensures a significantly longer lifespan and provides more stable readings over time. The module outputs an analog voltage inversely proportional to the moisture content, making it easy to interface with the ADC pins of an Arduino, ESP32, or Raspberry Pi.

Key Features

  • Corrosion Resistant Design: Capacitive sensing eliminates the "rusting" issue common in resistive probes, ensuring long-term underground stability.

  • On-board Voltage Regulator: Includes a high-stability LDO, allowing the sensor to operate accurately across a 3.3V to 5.5V range.

  • Analog Output: Provides a continuous voltage signal for granular moisture tracking rather than just a simple on/off state.

  • High-Quality Build: Manufactured on an industrial-grade FR-4 substrate with a protective coating to resist humid environments.

  • Plug-and-Play Interface: Features a 3-pin PH2.0 connector for easy, solder-less connections to development boards.

Technical Details

  • Sensing Principle: Measures changes in capacitance caused by the dielectric constant of the soil, which varies with water content.

  • Integrated Circuitry: Features a high-frequency oscillator and signal conditioning circuit to translate capacitance into a measurable voltage.

  • Output Voltage Range: Typically outputs ~1.2V to 3.0V (values vary based on calibration and soil density).

  • Power Efficiency: Draws an ultra-low current of only 5mA, making it suitable for solar-powered IoT sensor nodes.

  • Response Speed: Instantaneous measurement updates allow for real-time control of water pumps and valves.

  • Operating Temperature: Maintains high accuracy across a standard -10°C to +60°C agricultural temperature spectrum.

  • Environmental Sealing: The top electronics section is coated; however, only the probe section (indicated by the line) should be submerged.

  • Interface Wiring: Standard 3-pin color code: Red (VCC), Black (GND), and Blue/Yellow (Analog Signal).

  • Soil Compatibility: Effective in various mediums including potting soil, sand, coco-peat, and clay.

  • Resolution Performance: High sensitivity to minor moisture changes, allowing for precise "dry-to-saturated" mapping.

  • Mechanical Strength: The 1.6mm thick PCB provides sufficient rigidity for insertion into compacted soil.

  • Logic Compatibility: Fully compatible with both 3.3V (ESP32/STM32) and 5V (Arduino Uno/Mega) logic families.

  • Connector Type: Employs a secure PH2.0-3P terminal for vibration resistance in mobile agricultural robots.

  • Calibration Support: Since the output is analog, software-side calibration is used to define "dry" and "wet" thresholds for different soil types.

  • EMI Suppression: Internal trace layout is optimized to minimize interference from nearby WiFi or Bluetooth radios.

Prototyping and Engineering Tips from Robogears

  • 9V Battery Use: Do not connect 9V directly to the VCC pin. Power the sensor from the 5V or 3.3V regulated pin of your Arduino. High voltage will destroy the internal frequency generator IC.

  • 18650 Cell: A single 18650 cell (3.7V) is a perfect power source. Since the sensor works down to 3.3V, it will provide accurate readings throughout the battery's discharge cycle.

  • IC & Capacitor Tip: For stable readings in remote gardens, add a 10uF electrolytic capacitor at the sensor's power input. If the signal is "noisy" due to long wires, add a 0.1uF ceramic capacitor between the Analog Signal pin and GND.

  • Related Products: We recommend pairing this with our 5V Submersible Water Pumps, 1-Channel Relay Modules, and ESP32 Boards for a complete IoT smart irrigation kit.

Package Includes

  • 1 x Capacitive Soil Moisture Sensor v2.0 Module.

  • 1 x 3-Pin PH2.0 Connecting Cable.

Disclaimer Image is for illustration purpose only 2-3 lines. Only the probe portion below the white line should be inserted into the soil. Submerging the top electronic components will cause a short circuit and permanent damage.