Skip to Content
  1. All products
  2. Adapters
  3. 12V 1.5A DC Power Adapter (BEL/AC) – High-Efficiency SMPS Wall Charger for CCTV, Routers, LED Strips, and Robotics Projects
  4. Adapters
मूल्य सूची: Retail Price (B2C) मूल्य सूची
मूल्य सूची: Retail Price (B2C) मूल्य सूची
12V 1.5A DC Power Adapter (BEL/AC) – High-Efficiency SMPS Wall Charger for CCTV, Routers, LED Strips, and Robotics Projects

12V 1.5A DC Power Adapter (BEL/AC) – High-Efficiency SMPS Wall Charger for CCTV, Routers, LED Strips, and Robotics Projects

(0 review)
FeatureDetails
Input Voltage100V - 240V AC (50/60Hz)
Output Voltage12V DC
Output Current1.5 Amperes (1500mA)
Connector Type5.5mm x 2.1/2.5mm DC Barrel Plug
TechnologySwitching Mode Power Supply (SMPS)
ProtectionOverload, Short-Circuit, Surge Protection
Price
₹ 169.49 ₹ 169.49
(Tax included)

Product Description: The 12V 1.5A BEL Power Adapter is a compact and reliable power solution designed for continuous operation. Built using modern SMPS (Switching Mode Power Supply) technology, it ensures a stable 12V DC output with minimal heat dissipation and high energy efficiency. This adapter is widely used for powering electronics like CCTV cameras, Wi-Fi routers, small robotic arms, and LED lighting. Its robust internal circuitry is designed to handle Indian power fluctuations, making it a dependable choice for both home and industrial setups managed by Robogears Pvt Ltd.

Key Highlights

  • Universal Input Range: Operates smoothly between 100V and 240V AC, ensuring it works perfectly even in areas with inconsistent voltage.

  • Stable DC Output: Provides a clean 1.5A current, preventing "hum" in audio devices or flickering in LED applications.

  • Built-in Safety: Features auto-recovery short-circuit protection and over-current protection to safeguard your expensive electronic modules.

  • Ergonomic & Lightweight: The wall-mount design saves space on power strips and is lightweight enough to be used in portable project enclosures.

  • Standard DC Pin: Equipped with the most common 5.5mm x 2.1mm DC jack, compatible with most Arduino boards, developme

Technical Specifications

  • Output Power: 18 Watts

  • Ripple & Noise: $< 120$ mVp-p

  • Efficiency: $> 80\%$

  • Cable Length: ~1.0 Meter to 1.2 Meters

  • Housing Material: Fire-Retardant ABS Plastic

  • Polarity: Center Positive (Standard)

[Diagram showing the 5.5mm DC Barrel Plug with Center-Positive polarity]

Prototyping & Installation Tip When using this adapter for Robotics projects, ensure your motor drivers or microcontrollers (like an Arduino Mega) do not exceed a peak draw of 1.5A. If you are powering an LED strip, calculate your total wattage: for a 12V strip, 1.5A can safely handle up to 18 Watts. To extend the life of the adapter, avoid using it at 100% capacity for long durations; ideally, keep your continuous load around 1.2A (80% rule).

Note: This product includes 1 x 12V 1.5A Power Adapter. Product images are for illustration purposes only.