Skip to Content
  1. All products
  2. ⚡ Power & Management
  3. 🔋 Cells & Batteries
  4. 1000mAh 3.7V 14500 Li-ion Battery with BMS and JST Connector
  5. 🔋 Cells & Batteries
मूल्य सूची: Retail Price (B2C) मूल्य सूची
मूल्य सूची: Retail Price (B2C) मूल्य सूची
1000mAh 3.7V 14500 Li-ion Battery with BMS and JST Connector

1000mAh 3.7V 14500 Li-ion Battery with BMS and JST Connector

(0 review)
SpecificationDetails
Cell Type14500 Lithium-Ion
Nominal Voltage3.7V
Full Charge Voltage4.2V
Capacity1000 mAh
ProtectionIntegrated BMS (Overcharge & Over-discharge)
ConnectorJST-XHP 2-Pin
Configuration1S1P (Single Cell)
Price
₹ 67.80 ₹ 67.80
(Tax included)

Product Description

This 14500 Li-ion cell offers a superior energy-to-weight ratio, making it ideal for mobile applications. The built-in BMS provides a critical layer of protection by automatically cutting off power if the voltage drops below a safe threshold (preventing permanent cell damage) or if the charging voltage exceeds 4.2V. The JST-XHP connector ensures a secure, polarized connection to your project's power distribution board or motor driver.

Key Features

  • Built-in Protection: The integrated BMS circuit guards against over-discharging, over-charging, and short circuits, significantly increasing the battery's lifespan.

  • Standard Form Factor: The 14500 size allows it to fit into many existing battery compartments designed for AA cells (though the 3.7V output is much higher than 1.5V).

  • Reliable Connectivity: The JST-XHP 2-pin connector provides a "plug-and-play" experience and prevents accidental reverse polarity.

  • Consistent Output: Provides a stable discharge curve, ensuring your microcontrollers and sensors receive steady power until the battery is nearly depleted.

  • Lightweight Power: Perfect for miniature drones or RC gliders where minimizing weight is essential for performance.

Technical Details

  • Dimensions: ~50mm (length) x 14mm (diameter).

  • Cycle Life: Typically 300–500 charge/discharge cycles.

  • Operating Temp: -20°C to 60°C.

Prototyping and Engineering Tips from Robogears

  • Voltage Compatibility: Ensure your circuit is designed for 3.7V to 4.2V. While it looks like an AA battery, its voltage is more than double. Connecting this directly to a device meant for a 1.5V AA battery will likely destroy it.

  • Safe Charging: You must use a dedicated 3.7V Li-ion Charger (CC/CV profile). Never connect this directly to a generic 5V USB power source without a charging module like a TP4056.

  • BMS Cutoff Awareness: If your project suddenly loses power, the BMS may have triggered a low-voltage cutoff. Recharge the battery immediately to avoid leaving it in a deep-discharged state, which can degrade capacity.

  • Mounting: Because Li-ion cells are sensitive to heat and pressure, avoid soldering directly to the cell's casing. The pre-attached JST connector is provided specifically to avoid this risk.

Package Includes

  • 1 x 3.7V 1000mAh 14500 Li-ion Battery (with BMS & JST Connector)

Disclaimer

Lithium batteries should be handled with care. Do not puncture, crush, or expose to high temperatures. Use only compatible Li-ion charging equipment.