Skip to Content
  1. All products
  2. Motors
  3. ReadyToSky RS2205 2300KV CW Brushless Motor High Power Drone Racing Motor
  4. Motors
मूल्य सूची: Retail Price (B2C) मूल्य सूची
मूल्य सूची: Retail Price (B2C) मूल्य सूची
ReadyToSky RS2205 2300KV CW Brushless Motor High Power Drone Racing Motor

ReadyToSky RS2205 2300KV CW Brushless Motor High Power Drone Racing Motor

(0 review)
ComponentSpecification
ModelRS2205 2300KV
RotationCW (Clockwise)
KV Rating2300 RPM/Volt
Configuration12N14P
Input Voltage3S - 4S LiPo (11.1V - 14.8V)
Stator Diameter22 mm
Stator Height5 mm
Shaft Diameter5 mm
Price
₹ 614.41 ₹ 614.41
(Tax included)

Product Description The ReadyToSky RS2205 2300KV is a high-performance brushless motor specifically engineered for FPV racing quadcopters. Built for extreme power-to-weight ratios, it features N52 neodymium magnets and Japanese bearings for smooth, high-speed rotation. The integrated cooling fin design pulls air through the windings during flight, significantly reducing operating temperatures during aggressive maneuvers.

Key Features

  • High-performance N52 Neodymium magnets for maximum torque.

  • Active cooling fins significantly reduce motor temperature under load.

  • Low CG (Center of Gravity) design for improved flight response.

  • High-purity copper windings for optimized conductivity.

  • Integrated 5mm prop shaft for direct racing propeller mounting.

Technical Details

  • KV Value: 2300 RPM/V

  • Configuration: 12N14P

  • No-load Current: 0.6A at 10V

  • Internal Resistance: 0.06 Ohm

  • Maximum Continuous Power: 495W

  • Maximum Continuous Current: 30A

  • Motor Dimensions: 27.9mm x 31.7mm

  • Mounting Pattern: 16mm x 19mm (M3 screws)

Prototyping and Engineering Tips from Robogears

  • Direction Identification: This CW (Clockwise) motor features a standard right-hand thread. The nut tightens against the direction of rotation to prevent loosening during flight.

  • ESC Pairing: For 4S setups, use a 30A or 40A BLHeli ESC. Ensure the ESC can handle 30A peak bursts during full-throttle maneuvers.

  • Screw Safety: When mounting, ensure M3 screws do not touch internal copper windings. This will cause a short circuit and destroy both the motor and ESC.

  • Propeller Choice: Optimized for 5-inch props (e.g., 5045 tri-blades). Avoid oversized props on 4S to prevent exceeding thermal limits.

Package Includes

  • 1 x ReadyToSky RS2205 2300KV Brushless Motor (CW)

  • 1 x Propeller Nut

  • 1 x Set of Mounting Screws

Disclaimer Product images are for illustrative purposes; actual appearance may vary by batch. Specifications are subject to change by the manufacturer. Ensure correct ESC calibration and secure mounting before use. Handle high-speed motors with caution.