Skip to Content
  1. All products
  2. 🧠 Controllers & Systems
  3. 📟 Microcontroller Boards
  4. Arduino Pro Mini 5V 16MHz ATmega328P
  5. 📟 Microcontroller Boards
मूल्य सूची: Retail Price (B2C) मूल्य सूची
मूल्य सूची: Retail Price (B2C) मूल्य सूची
Arduino Pro Mini 5V 16MHz ATmega328P

Arduino Pro Mini 5V 16MHz ATmega328P

(0 review)
SpecificationDetails
MicrocontrollerATmega328P
Operating Voltage5V DC
Clock Speed16 MHz
Digital I/O Pins14 (6 provide PWM output)
Analog Input Pins8 (2 more than the Uno/Nano)
Flash Memory32 KB (2 KB used by bootloader)
SRAM / EEPROM2 KB / 1 KB
Price
₹ 245.76 ₹ 245.76
(Tax included)

बारकोड: 2145874

Product Description

The Pro Mini Official Version is engineered for maximum efficiency and minimalism. By removing the USB interface, the board significantly reduces power consumption, making it ideal for battery-operated applications. It features a standard 6-pin header (FTDI header) for programming and power, allowing you to use a single external FTDI cable or basic USB-to-TTL adapter for all your Pro Mini boards. Despite its tiny size, it retains the full processing power of the ATmega328P, including support for I2C, SPI, and UART communication protocols.

Key Features

  • Ultra-Compact Design: Smaller than a postage stamp, making it easy to hide inside small 3D-printed enclosures.

  • Low Power Profile: Without the USB chip constantly drawing current, this board is perfect for "Sleep Mode" battery projects.

  • 8 Analog Inputs: Includes pins A6 and A7, which are not accessible on the standard Arduino Uno, giving you more sensor integration options.

  • Onboard Reset Button: Features a tiny tactile switch for easy manual resetting during code debugging.

  • Flexible Powering: Can be powered via the VCC pin (regulated 5V) or the RAW pin (unregulated 5V–12V) thanks to the onboard voltage regulator.

Technical Details

  • DC Current per I/O Pin: 40 mA.

  • PCB Thickness: 0.8mm (Extra thin for weight reduction).

  • Weight: Less than 2 grams.

Prototyping and Engineering Tips from Robogears

  • Programming Requirement: Remember that this board cannot be plugged directly into a computer via USB. You must use an external FTDI Basic Breakout or a USB-to-TTL adapter. Ensure your adapter is set to 5V (not 3.3V) to match this board's logic level.

  • The "Auto-Reset" Trick: When using an FTDI adapter, connect the DTR pin. This allows the Arduino IDE to automatically reset the Pro Mini when you click "Upload." Without the DTR connection, you will have to manually press the Reset button at the exact moment the IDE says "Uploading..."

  • RAW vs. VCC: If you are using a 9V battery, connect it to the RAW pin. The onboard regulator will drop it to a safe 5V. If you have a steady 5V source (like from a phone charger), connect it directly to VCC to bypass the regulator and save energy.

  • Header Selection: This board usually comes with un-soldered headers. For the slimmest profile, consider soldering your wires directly to the pads instead of using pins, or use right-angle headers to keep the wiring parallel to the board.

Package Includes

  • 1 x Pro Mini ATmega328P (5V/16MHz) Board

  • 1 x Set of Male Header Pins

Disclaimer

This board is intended for users with basic soldering skills and experience with external programmers. Incorrect wiring to the power pins can permanently damage the ATmega328P chip.