Skip to Content
  1. All products
  2. 🧠 Controllers & Systems
  3. 📡 Sensors & Modules
  4. KY-008 5V 650nm Red Dot Laser Transmitter Module
  5. 📡 Sensors & Modules
मूल्य सूची: Retail Price (B2C) मूल्य सूची
मूल्य सूची: Retail Price (B2C) मूल्य सूची
KY-008 5V 650nm Red Dot Laser Transmitter Module

KY-008 5V 650nm Red Dot Laser Transmitter Module

(0 review)
SpecificationDetails
Operating Voltage5V DC
Output Power5mW
Wavelength650nm (Red)
Operating Current< 40mA
Beam ShapeDot (Focusable)
Dimensions18.5mm x 15mm
Operating Temp-10°C to +40°C
Price
₹ 50.85 ₹ 50.85
(Tax included)

Product Description

The KY-008 Module is a "plug-and-play" laser solution featuring a 6mm brass laser head mounted on a standard PCB. The brass head acts as a small heat sink and allows for minor manual focal adjustments by turning the front lens. Its 3-pin interface (GND, VCC, Signal) is designed for direct connection to microcontrollers like Arduino. When the signal pin is pulled HIGH, the laser activates instantly. Its low current draw (under 40mA) ensures it can be powered directly from a digital I/O pin without the need for an external driver or transistor.

Key Features

  • Focused Precision: Produces a small, bright red dot that remains visible even at distances of 10+ meters in low-light environments.

  • Instant Triggering: High-speed response time makes it suitable for pulsed data transmission or rapid-fire security sensors.

  • Brass Housing: Provides mechanical protection for the delicate laser diode and aids in thermal dissipation during extended use.

  • Easy Mounting: The PCB includes a 3mm mounting hole, allowing for rigid attachment to a robot chassis or a stationary tripod.

  • Standard 5V Logic: No special power supplies required; it works seamlessly with the standard 5V rail of most development boards.

Technical Details

  • Laser Class: Class IIIa (standard for hobbyist modules).

  • Connector: 2.54mm pitch headers.

  • Pinout: "S" (Signal/5V), Middle (No Connection/5V), "-" (GND).

Prototyping and Engineering Tips from Robogears

  • The "Invisible" Tripwire: To create a security alarm, point this laser at a KY-018 Photoresistor (LDR) Module. When an object blocks the beam, the LDR's resistance will change instantly, allowing your Arduino to trigger a buzzer or notification.

  • Heat Management: While the brass head helps, avoid leaving the laser on continuously for hours. If your project requires a "constant-on" state, implement a PWM duty cycle (e.g., 80% brightness) to reduce heat buildup and extend the life of the laser diode.

  • Adjusting the Focus: If the red dot appears "fuzzy" or too large at a distance, you can gently rotate the black plastic lens at the very front of the brass cylinder to sharpen the point.

  • Safety First: Never point the laser beam at people’s eyes or reflective surfaces like mirrors. Even a 5mW laser can cause permanent retinal damage or temporary "flash blindness."

Package Includes

  • 1 x KY-008 650nm 5V Laser Module

Disclaimer

This is a hobby-grade laser module. Use only within the specified 5V range. Avoid high-vibration environments that might loosen the internal lens alignment.