Skip to Content
  1. All products
  2. Cell & Batteries
  3. Accuplus AA Ni-MH 1.2V 1800mAh Button Top Rechargeable Battery Pack of 2 for Toys and DIY
  4. Cell & Batteries
मूल्य सूची: Retail Price (B2C) मूल्य सूची
मूल्य सूची: Retail Price (B2C) मूल्य सूची
Accuplus AA Ni-MH 1.2V 1800mAh Button Top Rechargeable Battery Pack of 2 for Toys and DIY

Accuplus AA Ni-MH 1.2V 1800mAh Button Top Rechargeable Battery Pack of 2 for Toys and DIY

(0 review)
ComponentSpecification
BrandAccuplus
ChemistryNickel-Metal Hydride (Ni-MH)
SizeAA (HR6)
Nominal Voltage1.2V per cell
Capacity1800mAh
Packaging1 Pair (2 Units)
Terminal TypeButton Top
Price
₹ 93.22 ₹ 93.22
(Tax included)

Product Description The Accuplus AA 1800mAh Ni-MH battery pair is a high-capacity rechargeable solution designed to replace single-use alkaline batteries in high-drain devices. With a 1800mAh rating, these cells provide a balance of long runtime and rapid rechargeability, making them ideal for motorized toys, wireless controllers, digital cameras, and portable medical equipment. Unlike older Ni-Cd batteries, these Ni-MH cells have a significantly reduced memory effect and are more environmentally friendly, offering hundreds of charge cycles for sustainable power.

Key Features

  • High Energy Density: 1800mAh capacity provides sustained power for energy-intensive applications.

  • Cost-Effective: One pair can replace hundreds of alkaline batteries over its service life.

  • Stable 1.2V Output: Maintains a consistent voltage curve during discharge, ensuring smooth operation of motors and sensors.

  • Eco-Friendly Formulation: Free of Cadmium and Mercury, reducing toxic waste in landfills.

  • Low Internal Resistance: Capable of delivering higher currents required by high-torque hobby motors.

Technical Details

  • Dimensions: 50.5 mm (Height) x 14.5 mm (Diameter)

  • Standard Charge: 180mA for 14–16 hours

  • Rapid Charge: ~500mA to 900mA (with smart charger termination)

  • Operating Temperature: -10°C to +50°C

  • Cycle Life: 500+ Recharges

  • Weight: Approx. 26g per cell

Prototyping and Engineering Tips from Robogears

  • Series Stacking for 4.8V: Using this pair (2 cells) in series gives you 2.4V. To power a 5V system like an Arduino or Raspberry Pi Pico, we recommend using two pairs (4 cells) in series to achieve a nominal 4.8V. This is often close enough to 5V to run logic circuits without a regulator, though a boost/buck converter is always safer.

  • Smart Charging: To get the longest life out of your Accuplus batteries, use a charger with $-\Delta V$ (negative delta voltage) detection. Overcharging Ni-MH cells can cause internal pressure buildup and venting.

  • The "Alkaline Swap": While these are 1.2V and Alkalines are 1.5V, most devices work better with these under load. Alkaline batteries drop to 1.1V very quickly when a motor starts, whereas Ni-MH stays steady at 1.2V for almost the entire run.

  • Maintenance Charge: If your robot is sitting on the shelf for more than 3 months, give the batteries a top-up charge. Ni-MH cells have a natural self-discharge rate; keeping them slightly charged prevents the voltage from dropping to a level where a charger might fail to recognize them.

Package Includes

  • 1 x Pair (2 Cells) of Accuplus AA 1800mAh Ni-MH Rechargeable Batteries

Disclaimer

Images are for reference; actual labeling or wrapper color may vary by batch. Specifications subject to change by manufacturer. Do not short-circuit or mix with different battery chemistries.