Skip to Content
  1. All products
  2. 🏗️ Prototyping & Wiring
  3. 🧶 Jumper Cables & Berg Strips
  4. 20cm Male to Male Rainbow Jumper Ribbon Cable (40-Pin)
  5. 🧶 Jumper Cables & Berg Strips
मूल्य सूची: Retail Price (B2C) मूल्य सूची
मूल्य सूची: Retail Price (B2C) मूल्य सूची
20cm Male to Male Rainbow Jumper Ribbon Cable (40-Pin)

20cm Male to Male Rainbow Jumper Ribbon Cable (40-Pin)

(0 review)
SpecificationDetails
Quantity40 Pieces (Ribbon Format)
Connector TypeMale to Male (Plug-to-Plug)
Length200mm (20cm)
Pitch2.54mm (0.1 inch) Standard
Wire Gauge26 AWG to 28 AWG
MaterialStranded Copper with PVC Insulation
Price
₹ 55.08 ₹ 55.08
(Tax included)

Product Description

The 40-Pin Male-to-Male Jumper Set is supplied as a single, wide ribbon cable that can be easily peeled into individual wires or smaller functional groups. This allows you to keep a 4-wire strip together for I2C communication or an 8-wire strip for parallel data buses, significantly reducing "spaghetti wiring." The molded 0.1" pitch pins are designed for a secure friction fit, ensuring reliable electrical contact for sensors, drivers, and development boards.

Key Features

  • Massive Connectivity: With 40 wires in one pack, you have enough capacity for complex systems involving multiple modules and breadboards.

  • Organized Bus Routing: Keeping the ribbon intact creates a professional look and makes it easier to trace signals during troubleshooting.

  • Universal 2.54mm Pitch: Fully compatible with all standard breadboards, PC headers, and DIY electronics modules.

  • Rainbow Color Coding: Features 10 repeating colors (Red, Black, Yellow, etc.) to help you visually distinguish Power, Ground, and Signal lines.

  • Flexible Stranded Core: Multi-strand internal copper wire offers high flexibility and resistance to breaking, even with frequent repositioning.

Technical Details

  • Insulation: Durable and flexible PVC.

  • Current Rating: Optimized for logic-level signals and low-power delivery (up to ~500mA).

  • Connector Finish: Nickel-plated terminals for corrosion resistance.

Prototyping and Engineering Tips from Robogears

  • Breadboard Discipline: When plugging into a breadboard, push the pin until the plastic housing is nearly flush. Half-inserted pins are the #1 cause of "intermittent" circuit failures.

  • Color Standards: Always use Red for VCC and Black/Brown for GND. This simple habit prevents accidental short circuits that can permanently damage sensitive microcontrollers.

  • Data Bus Alignment: If you are wiring a 16x2 LCD in 4-bit mode, peel off a 6-wire section of the ribbon. Keeping them attached ensures the pin order remains consistent from the Arduino to the display.

  • Internal Fatigue: If a circuit stops working, wiggling the wire. If the signal flickers, the internal copper may be fatigued from too much bending; replace that specific strand from your 40-piece set.

Package Includes

  • 1 x 40-Pin Male-to-Male Jumper Wire Ribbon (20cm)

Disclaimer

These jumpers are intended for signal-level currents. Do not use them to power high-torque motors or heating elements, as the thin gauge wire may cause a voltage drop or overheat.