Skip to Content
  1. All products
  2. 🧠 Controllers & Systems
  3. 📡 Sensors & Modules
  4. Mini Micro SD Card Reader Module – High-Speed SPI Interface Level Shifter Board
  5. 📡 Sensors & Modules
मूल्य सूची: Retail Price (B2C) मूल्य सूची
मूल्य सूची: Retail Price (B2C) मूल्य सूची
Mini Micro SD Card Reader Module – High-Speed SPI Interface Level Shifter Board

Mini Micro SD Card Reader Module – High-Speed SPI Interface Level Shifter Board

(0 review)
ParameterDetailed Specification
Compatible CardMicro SD (TF) Card (up to 32GB)
InterfaceSPI (Serial Peripheral Interface)
Logic Voltage3.3V / 5V Compatible (On-board Level Shifter)
Power Supply4.5V to 5.5V DC
RegulatorIntegrated 3.3V LDO Regulator
Slot TypePush-Pull Micro SD Slot
PCB Dimensions42mm x 24mm
Price
₹ 42.37 ₹ 42.37
(Tax included)

Product Description

Expand the memory of your microcontroller projects with the Mini Micro SD Card Reader Module. This module allows you to read from and write to standard Micro SD cards, making it ideal for data logging, storing configuration files, or playing audio files. At Robogears, we recommend this specific module because it features an on-board level conversion circuit. This means you can safely connect it to a 5V Arduino Uno or a 3.3V ESP32 without worrying about damaging your SD card's sensitive logic. Whether you are building a weather station that logs data every minute or a DIY MP3 player at your Pimpri workshop, this SPI-based reader provides a reliable and high-speed storage solution.

Detailed Key Features

  • Integrated Level Shifter: Built-in 74VHC125 or equivalent buffer converts 5V signals to 3.3V, ensuring high-speed data integrity and card safety.

  • Standard SPI Communication: Uses only 4 signal pins (MISO, MOSI, SCK, CS), leaving plenty of GPIOs free for other sensors and actuators.

  • On-board 3.3V Regulator: Includes a dedicated LDO to provide clean power to the SD card, even when powered from a 5V rail.

  • High Compatibility: Supports both standard Micro SD and Micro SDHC cards (formatted to FAT16 or FAT32).

  • M3 Mounting Holes: Features four positioning holes for secure attachment to your robot's chassis or project enclosure.

All Technical Details

  • Pin Definition:

    • GND: Common Ground.

    • VCC: Power Input (4.5V - 5.5V).

    • MISO: Master In Slave Out (Data to MCU).

    • MOSI: Master Out Slave In (Data from MCU).

    • SCK: Serial Clock.

    • CS: Chip Select (Selectable GPIO).

  • File System: Optimized for FAT16/FAT32 formatted cards.

  • Applications: GPS data logging, black-box flight recorders, digital picture frames, and industrial sensor history storage.

Prototyping & Engineering Tips (Robogears Exclusive)

  • Formatting is Key: At our Pimpri facility, we’ve found that most "SD Card Not Found" errors are solved by formatting the card. Use the Official SD Memory Card Formatter (FAT32) rather than the standard Windows quick format for best results.

  • CS Pin Assignment: While MISO, MOSI, and SCK are fixed on your MCU, you can use any digital pin for CS. Just ensure you update the SD.begin(CS_PIN) line in your Arduino code to match your wiring.

  • Power Stability: Writing to an SD card causes momentary current spikes. If your module fails during a "write" operation, add a 10µF capacitor between VCC and GND to stabilize the voltage.

  • Library Recommendation: Use the standard <SD.h> library included with the Arduino IDE. For more advanced or faster logging, the SdFat library is an excellent alternative.

Package Includes

  • 1 x Mini Micro SD Card Reader Module

Image Disclaimer

Product images are shown for illustrative purposes only. The color of the PCB (typically Blue) or the specific brand of the level shifter chip may vary between batches, but the SPI Micro SD reading performance and 5V compatibility remain as described.