Skip to Content
  1. All products
  2. display
  3. 1.3-inch I2C OLED Display Module – 128x64 White Pixels, SH1106 Driver, 4-Pin Interface for Arduino, ESP32 & Raspberry Pi
  4. display
Pricelist: Retail Price (B2C) Pricelist
Pricelist: Retail Price (B2C) Pricelist
1.3-inch I2C OLED Display Module – 128x64 White Pixels, SH1106 Driver, 4-Pin Interface for Arduino, ESP32 & Raspberry Pi

1.3-inch I2C OLED Display Module – 128x64 White Pixels, SH1106 Driver, 4-Pin Interface for Arduino, ESP32 & Raspberry Pi

(0 review)

  • FeatureDetails
    Display TechnologyOLED (Organic Light Emitting Diode)
    Screen Size1.3 Inch
    Resolution128 x 64 Pixels
    Driver ICSH1106 (I2C Version)
    InterfaceI2C (GND, VCC, SCL, SDA)
    Pixel ColorWhite
Price
₹ 292.37 ₹ 292.37
(Tax included)

Product Description & Technical Details

Product Description The 1.3-inch I2C OLED Module is a crisp, high-contrast display solution perfect for adding a professional user interface to your electronics projects. Unlike traditional LCDs, OLED technology does not require a backlight; each pixel is self-illuminating. This results in deep black levels and significantly lower power consumption. While it looks similar to the common 0.96-inch display, this 1.3-inch version offers a larger viewing area, making text much easier to read. At Robogears, we frequently use this for real-time sensor dashboards, portable gaming consoles, and menu systems for CNC controllers.

Key Highlights

  • Self-Illuminating Pixels: Since there is no backlight, the display is paper-thin and offers an incredibly wide viewing angle (greater than 160°).

  • I2C Simplicity: Uses only two signal wires (SDA and SCL), saving valuable I/O pins on your microcontroller.

  • SH1106 Controller: Driven by the robust SH1106 IC, which is highly compatible with popular graphics libraries like U8g2.

  • Wide Voltage Range: Onboard level shifters allow the module to operate safely on both 3.3V and 5V logic, making it a "plug-and-play" choice for both Arduino and ESP32.

  • High Contrast: The 128x64 resolution provides sharp graphics and clear fonts, even in bright ambient light.

Technical Specifications

  • Operating Voltage: 3.3V to 5.0V DC

  • Power Consumption: ~20mA (Full screen on)

  • Operating Temperature: -40°C to +70°C

  • I2C Address: 0x3C (Default)

  • Dimensions: ~35mm x 33mm

Installation Tip from Robogears It is important to note that most 1.3-inch OLEDs use the SH1106 driver, whereas the smaller 0.96-inch versions typically use the SSD1306. If you use the standard SSD1306 library, your screen might appear shifted or show "snow" on the edges. We highly recommend using the U8g2 library and selecting the U8G2_SH1106_128X64_NONAME_F_HW_I2C constructor. For wiring, connect SDA to A4 and SCL to A5 on an Arduino Uno. If you are using an ESP32, SDA is usually pin 21 and SCL is pin 22.

Note: This product is the 1.3-inch OLED Module ONLY. Header pins are pre-soldered on most versions. Product images are for illustration purposes only.