Skip to Content
  1. All products
  2. 🧠 Controllers & Systems
  3. 📟 Microcontroller Boards
  4. Universal PIC Programmer Adapter Board for KIT2/KIT3
  5. 📟 Microcontroller Boards
Pricelist: Retail Price (B2C) Pricelist
Pricelist: Retail Price (B2C) Pricelist
Universal PIC Programmer Adapter Board for KIT2/KIT3

Universal PIC Programmer Adapter Board for KIT2/KIT3

(0 review)
SpecificationDetails
CompatibilityICD2, PICKIT2, PICKIT3, PICKIT4
Supported PackagesDIP8, DIP14, DIP18, DIP20, DIP28, DIP40
Interface6-Pin ICSP (In-Circuit Serial Programming)
Socket Type40-Pin Universal ZIF Socket
Operating Voltage3.3V to 5V (Derived from Programmer)
Dimensions~80mm x 30mm
PCB MaterialHigh-Grade FR-4
Price
₹ 169.49 ₹ 169.49
(Tax included)

Product Description

The PIC Universal Programming Adapter is engineered to eliminate the "rat's nest" of wires typically associated with PIC development. The board is divided into zones that support the different pinouts of 8-pin to 40-pin DIP (Dual In-line Package) microcontrollers. It features a standard 6-pin ICSP header that connects directly to your PICKIT programmer using a simple ribbon cable. The high-quality ZIF socket ensures that the pins of your microcontrollers are not bent or damaged during repeated insertion and removal, making it a "must-have" for batch programming and prototyping.

Key Features

  • Universal DIP Support: A single board handles almost the entire range of DIP-packaged PIC microcontrollers.

  • Plug-and-Play ICSP: Features a clearly marked 6-pin header for instant connection to official and clone Microchip programmers.

  • ZIF Socket Convenience: The lever-action socket provides a secure mechanical connection with zero insertion force.

  • Clear Pin Mapping: The PCB is silkscreened with instructions on where to place different IC sizes (e.g., 8-pin vs 28-pin) for correct alignment.

  • Compact Layout: Small enough to be kept permanently on a workbench or stored inside a programmer's carrying case.

Technical Details

  • Connection: Standard 2.54mm pitch headers.

  • Component Quality: Uses high-end sockets rated for thousands of cycles.

  • Versatility: Can be used for both programming and basic bench testing of the IC.

Prototyping and Engineering Tips from Robogears

  • Alignment is Everything: Always check the silkscreen markings on the back or front of the board before inserting your IC. Different chip families (e.g., PIC12F vs PIC16F) may need to be aligned to different ends of the 40-pin ZIF socket to match the VCC and GND pins.

  • The "No Device Found" Fix: If your PICKIT software cannot find the chip, ensure the ZIF socket lever is fully down. A loose connection is the most common cause of programming failure. Also, verify that the ICSP cable is oriented correctly (Pin 1 is usually marked with an arrow or a triangle).

  • VPP Voltage: Some older PIC chips require a high programming voltage (VPP) of around 12V. Ensure your PICKIT settings in MPLAB X are configured to provide the correct voltage for the specific chip model you have inserted.

  • External Components: This adapter is for programming only. If your code requires an external crystal oscillator to run, the chip will not "execute" its program while in this board unless you manually jumper a crystal to the appropriate pins.

Package Includes

  • 1 x PIC ICD2/PICKIT2/PICKIT3 Universal Programming Adapter

Disclaimer

Ensure the microcontroller is inserted in the correct orientation. Reversing the IC or misaligning the pins can cause a short circuit that may damage both the microcontroller and your PICKIT programmer.