Skip to Content
  1. All products
  2. Microcontrollers
  3. Official Raspberry Pi 3 Model B Case – High-Quality Red/White Protective Enclosure with Removable Lid and Side Panels for Pi 3 Model B and B+
  4. Microcontrollers
Pricelist: Retail Price (B2C) Pricelist
Pricelist: Retail Price (B2C) Pricelist
Official Raspberry Pi 3 Model B Case – High-Quality Red/White Protective Enclosure with Removable Lid and Side Panels for Pi 3 Model B and B+

Official Raspberry Pi 3 Model B Case – High-Quality Red/White Protective Enclosure with Removable Lid and Side Panels for Pi 3 Model B and B+

(0 review)
ParameterDetailed Specification
CompatibilityRaspberry Pi 3 Model B, Raspberry Pi 3 Model B+
MaterialHigh-Quality Impact-Resistant ABS
Color SchemeSignature Raspberry Red & White
Design5-Part Modular Snap-fit Enclosure
FeetAnti-slip Silicon Feet included
Special FeatureRemovable top and side panels for GPIO access
Price
₹ 122.88 ₹ 122.88
(Tax included)

Product Description

The Official Raspberry Pi 3 Case is the premium protective solution designed by the Raspberry Pi Foundation specifically for the Model B and B+. This iconic red and white enclosure features a highly versatile 5-part modular design, allowing you to customize the case based on your project needs. You can keep the case fully enclosed for a sleek look or remove the top and side panels to access the GPIO pins, camera port, and display port. Precision-molded to fit the Pi 3 perfectly, it ensures your hardware remains protected from dust and electrical shorts while providing a professional finish to your builds at Robogears.

Detailed Key Features

  • Modular Versatility: The 5-part design (top, bottom, and three side panels) can be easily snapped on or off, providing ultimate flexibility for both desktop and embedded use.

  • Direct Component Access: Removing the top lid gives you immediate access to the 40-pin GPIO header and internal ribbon cable connectors (CSI and DSI) without exposing the entire PCB.

  • Precision Port Cut-outs: Every opening for the USB, Ethernet, HDMI, Audio, and Micro-USB power ports is laser-aligned to prevent mechanical interference with cables.

  • Integrated LED Viewing: Includes integrated transparent light pipes that align with the Pi 3's onboard status LEDs, allowing you to monitor power and activity at a glance.

  • Tool-less Assembly: The entire case snaps together securely without the need for screws or tools, making it easy to swap boards in your Pimpri lab.

All Technical Details

  • Material Composition: Durable ABS plastic that provides excellent electrical insulation and moderate thermal resistance.

  • Ventilation: Designed with internal clearance to promote natural airflow around the Broadcom processor.

  • Dimensions: 96mm x 71mm x 26mm.

  • Weight: Approximately 50 grams.

  • Mechanical Fit: Features internal standoffs that hold the Raspberry Pi PCB securely in place without stressing the board.

Prototyping & Engineering Tips (Robogears Exclusive)

  • Heat Management: For high-load applications, we recommend removing the white top panel. This allows heat to escape via convection, especially if you have installed an aluminum heatsink on the CPU.

  • HAT Compatibility: While this case is excellent for standard projects, some larger "HAT" (Hardware Attached on Top) boards may require the side panels to be removed for a proper fit.

  • SD Card Swapping: The case is designed with a specific slot at the rear, allowing you to change your MicroSD card without taking the case apart.

  • Stable Mounting: Always apply the included four silicon feet to the bottom of the case; this prevents the Pi from sliding across your desk when heavy HDMI or USB cables are connected.

Package Includes

  • 1 x Official Raspberry Pi 3 Case (Red/White 5-Part Set)

  • 4 x Non-slip Silicon Feet

Image Disclaimer

Image shown is for illustrative purposes only; the actual product may vary slightly in design, color, or component layout due to manufacturing updates, though all technical specifications will remain as described.