Skip to Content
  1. All products
  2. ⚡ Power & Management
  3. 1000mAh 2 X 3.7V 14500 Li-ion Battery with BMS and JST Connector
  4. ⚡ Power & Management
Pricelist: Retail Price (B2C) Pricelist
Pricelist: Retail Price (B2C) Pricelist
1000mAh 2 X 3.7V 14500 Li-ion Battery with BMS and JST Connector

1000mAh 2 X 3.7V 14500 Li-ion Battery with BMS and JST Connector

(0 review)
SpecificationDetails
Battery Configuration2S1P (2 Cells in Series)
Nominal Voltage7.4V
Full Charge Voltage8.4V
Capacity1000 mAh
Cell Type14500 Lithium-Ion
ProtectionIntegrated BMS (Overcharge, Over-discharge, Short-circuit)
Connector TypeJST-XHP 2-Pin
Price
₹ 127.12 ₹ 127.12
(Tax included)

Product Description

This battery pack provides a steady 7.4V nominal output, making it the perfect power source for systems that require more voltage than a single 3.7V cell can provide but need to remain lightweight. The 14500 cell form factor (same dimensions as a standard AA battery) allows this pack to fit into slim enclosures. The built-in BMS acts as a silent guardian, automatically cutting off power if the voltage drops too low or if a short circuit is detected, significantly extending the life of the cells.

Key Features

  • Integrated Safety: The onboard BMS prevents the most common causes of Li-ion failure, including over-charging and deep discharging.

  • High Energy Density: Offers a much higher capacity-to-weight ratio compared to NiMH or Lead-Acid alternatives.

  • Plug-and-Play: Features a pre-crimped JST connector, allowing for quick connection to motor drivers or power distribution boards.

  • Stable Discharge: Provides a consistent current flow, essential for the smooth operation of servos and microcontrollers.

  • Lightweight Design: Optimized for mobile robotics and drones where every gram of weight matters for battery efficiency and flight time.

Technical Details

  • Dimensions: ~50mm x 28mm x 14mm (Compact AA-style twin pack).

  • Charging Current: Recommended 0.5A to 1A for maximum cycle life.

  • Wire Gauge: Standard 22AWG or 24AWG flexible silicone/PVC wire.

Prototyping and Engineering Tips from Robogears

  • Charging Requirements: You must use a dedicated 7.4V (2S) Li-ion charger. Never use a standard 5V USB phone charger or a 12V adapter directly, as the BMS is designed for protection, not for regulating charging voltage.

  • Voltage Monitoring: While the BMS provides a safety cutoff, for professional projects, use an Analog Input pin on your Arduino (via a voltage divider) to monitor the battery level and trigger a "Low Battery" alert in your software.

  • The "JST" Match: Ensure your receiving header is a JST-XH type. While many connectors look similar, forcing a different type can reverse the polarity, which will damage your electronics instantly.

  • Mounting Tip: Use 3M Dual Lock or high-quality Velcro to secure the battery. Avoid using tight zip-ties directly against the battery casing, as excessive pressure can damage the internal cells or the BMS circuitry.

Package Includes

  • 1 x 7.4V 1000mAh 2S 14500 Li-ion Battery Pack (with BMS & JST Connector)

Disclaimer

Lithium batteries are high-energy devices. Do not puncture, incinerate, or expose to temperatures above 60°C. Always charge in a fire-safe location.