Skip to Content
  1. All products
  2. Sensors & Modules
  3. ESP32-CAM-MB Micro USB Programmer Shield for ESP32-CAM Development Board with CH340G Serial IC
  4. Sensors & Modules
Pricelist: Retail Price (B2C) Pricelist
Pricelist: Retail Price (B2C) Pricelist
ESP32-CAM-MB Micro USB Programmer Shield for ESP32-CAM Development Board with CH340G Serial IC

ESP32-CAM-MB Micro USB Programmer Shield for ESP32-CAM Development Board with CH340G Serial IC

(0 review)
FeatureDetails
CompatibilityESP32-CAM AI-Thinker Module
USB InterfaceMicro-USB (Power & Data)
Onboard ChipsetCH340G USB-to-Serial
Programming ModeAutomatic Flashing Support
Voltage Input5.0V via USB
ButtonsReset and Boot/IO0
Price
₹ 110.17 ₹ 110.17
(Tax included)

The Hassle-Free Way to Program Your ESP32-CAM Tired of messy jumper wires and FTDI adapters just to upload a simple sketch? The ESP32-CAM-MB Micro USB Shield is the definitive "plug-and-play" solution for your ESP32-CAM development board. This shield acts as a specialized programmer that eliminates the need for manual wiring. Simply snap your ESP32-CAM module onto the GPIO headers, plug in a Micro-USB cable, and you're ready to start coding.

Integrated CH340G USB-to-Serial Technology Built with the reliable CH340G chipset, this shield provides a stable bridge between your computer and the ESP32-CAM. Unlike standard serial adapters, the DigiBridge shield is designed to handle the specific reset and boot-mode requirements of the ESP-series chips. It features an automatic flashing circuit, which means no more holding down buttons while you wait for the "Uploading..." message in the Arduino IDE.

Optimized Power and Stability Programming a camera module requires stable current, especially during Wi-Fi transmission. This shield is designed to draw a steady 5V directly from your USB port, ensuring that the ESP32-CAM doesn't brown out during firmware updates or image captures. With its compact black PCB and high-quality female headers, it provides a secure and stable platform for long-term development.

Key Highlights:

  • Direct Micro-USB Connection: No more external FTDI modules or messy wiring.

  • Auto-Reset Circuitry: Enables one-click uploads from Arduino IDE or PlatformIO.

  • Onboard Buttons: Dedicated Reset and IO0 buttons for manual control when needed.

  • Secure Fit: Designed specifically for the AI-Thinker ESP32-CAM pinout.

  • Compact Footprint: Small enough to be used as a permanent base for your Wi-Fi camera projects.

Technical Specifications

  • Module Name: ESP32-CAM-MB

  • Chipset: CH340G USB-to-UART

  • Power Supply: 5V DC via Micro-USB

  • Compatibility: AI-Thinker ESP32-CAM (OV2640/OV7670)

  • Serial Baud Rate: Default 115200 bps

  • Status Indicators: Power LED

  • I/O Access: Pass-through access to ESP32-CAM GPIOs

  • Dimensions: 40mm (L) x 25mm (W) x 10mm (H)

  • Weight: ~8 Grams

Package Includes:

  • 1 x ESP32-CAM-MB Micro USB Programmer Shield

Note: The ESP32-CAM board and OV2640 camera module are not included and must be purchased separately.