Skip to Content
  1. All products
  2. DIY Kits
  3. Jumbo 2 Four-Wheel Robot Chassis - Heavy Duty Metal Base (Black)
  4. DIY Kits
मूल्य सूची: Retail Price (B2C) मूल्य सूची
मूल्य सूची: Retail Price (B2C) मूल्य सूची
Jumbo 2 Four-Wheel Robot Chassis - Heavy Duty Metal Base (Black)

Jumbo 2 Four-Wheel Robot Chassis - Heavy Duty Metal Base (Black)

(0 review)
ComponentSpecification
MaterialHigh-Grade Sheet Metal (Powder Coated)
Chassis TypeJumbo 2 (Extended Wide Base)
ColorIndustrial Matte Black
Motor CompatibilityBO Motors, DC Geared Motors (Center Shaft)
Mounting HolesPre-drilled for Sensors, Caster Wheels, and Boards
Thickness~1.2mm - 1.5mm
Price
₹ 135.59 ₹ 135.59
(Tax included)

Product Description The 4 Wheel Chassis Jumbo 2 (Black) is a rugged, heavy-duty foundation designed for advanced robotics and autonomous vehicle prototyping. Unlike standard plastic frames, this metal chassis provides superior structural integrity for carrying heavier payloads such as large lead-acid batteries, multiple sensors, and complex mechanical arms. Its spacious top deck offers ample room for mounting Arduino, Raspberry Pi, or ESP32 controllers, making it the preferred choice for professional-grade DIY projects.

Key Features

  • Industrial Strength: Fabricated from reinforced metal to withstand impacts and provide a vibration-free platform for sensitive electronics.

  • Extended "Jumbo" Design: Offers a larger surface area compared to standard chassis, allowing for more complex component layouts.

  • Matte Powder Coating: The high-quality black finish prevents rust and provides a professional aesthetic for your robotic prototypes.

  • Pre-Drilled Versatility: Features precision-cut holes for motor brackets, standard caster wheels, and ultrasonic sensors (HC-SR04).

  • Multi-Motor Support: Designed to accommodate 4-wheel drive setups, providing maximum traction for off-road or indoor navigation tasks.

Technical Details

  • Center Hole: Includes a central wiring hole to route cables from the motors underneath to the controller boards on top cleanly.

  • Weight Distribution: The wide wheelbase ensures high stability, preventing the robot from tipping during sharp turns or rapid acceleration.

  • Durability: Resistant to the heat generated by high-power motor drivers and heavy-duty battery packs.

Prototyping and Engineering Tips from Robogears

  • Motor Mounting: While this chassis is compatible with plastic BO motors, for a "Jumbo" build, we recommend using metal-geared DC motors to match the chassis's durability and weight-carrying potential.

  • Grounding Safety: Since the chassis is metal, ensure your circuit boards are mounted using nylon spacers or standoffs. This prevents accidental short circuits between the board pins and the metal frame.

  • Caster Choice: For smooth 360-degree turning, mount a ball caster wheel at the front and back centers if you are using a 2-motor drive, or use 4 wheels for a direct-drive tank-style steering system.

  • Cable Management: Use the pre-drilled side holes for cable ties to keep your wiring neat. Neatly organized wires prevent "signal noise" and make troubleshooting much easier during competition.

Package Includes

  • 1 x Jumbo 2 Metal Chassis (Black)

  • Note: Motors, wheels, and hardware sets are sold separately unless purchased as part of a full kit.

Disclaimer Images are for reference; minor variations in hole patterns may occur based on the latest production revisions. CHASSIS ONLY: This product includes the metal frame only; all electronic and mechanical components must be added separately.