MT3608 2A Max DC-DC Step-Up Power Module – Adjustable Boost Converter (2V-24V to 5V-28V) for Battery-Powered Projects, IoT, and DIY Electronics

Product Description

Step up your voltage requirements with the ultra-compact MT3608 2A Max DC-DC Step-Up Power Module. This high-efficiency boost converter is designed to take a low input voltage (as low as 2V) and regulate it up to a higher output voltage (up to 28V). Powered by the MT3608 IC which switches at a high frequency of 1.2 MHz, the module utilizes small ceramic capacitors and inductors to maintain a tiny footprint without compromising on performance. At Robogears, we recommend this module for battery-powered projects, driving LED strips, and powering 5V or 12V peripherals from a single lithium-ion cell. With its integrated over-current and thermal limiting features, it provides a safe and reliable power solution for all your DIY and prototyping needs.

Detailed Key Features

• High Efficiency Performance: Boasts an efficiency rating of up to 93%, ensuring minimal power loss and reduced heat generation during voltage conversion.

• Precise Voltage Regulation: Features a 25-turn multi-turn potentiometer, allowing you to fine-tune the output voltage to the exact level required by your circuitry.

• Compact and Lightweight: At just 37mm in length and weighing 3-4g, it is perfectly suited for space-constrained IoT devices and portable electronics.

• Low ESR Ceramic Capacitors: Employs ceramic capacitors instead of electrolytic ones to avoid aging concerns and provide superior noise filtration and longevity.

• Integrated Protection: Built-in thermal shutdown and current limiting features protect the module from damage if driven beyond its rated capacity.

All Technical Details

• Frequency Modulation: Automatically shifts to pulse frequency modulation (PFM) mode at light loads to maintain high efficiency.

• MOSFET Integration: Features an integrated 80mΩ power MOSFET for stable and powerful switching.

• Temperature Range: Rated for stable operation between -40°C and +90°C.

• Ripple Performance: Low output ripple (<100mV) ensures stable power for sensitive microcontrollers and sensors.

• Interface: 4 clearly marked solder pads (VIN+, VIN-, VOUT+, VOUT-) for secure electrical connections.