★ 4.9★ Rated by 750+ Customers on Google

🚀 Startup India Recognized Company

🚚 Pan India Delivery via Trusted Courier Partners

🏬 Only Physical + Online Robotics Store in Pimpri

🎓 Trusted by Engineering Students, Makers & Innovators Across India

★ 4.9★ Rated by 750+ Customers on Google

🚀 Startup India Recognized Company

🚚 Pan India Delivery via Trusted Courier Partners

🏬 Only Physical + Online Robotics Store in Pimpri

🎓 Trusted by Engineering Students, Makers & Innovators Across India

6A4 6A 400V Silicon Rectifier Diode (5 Piece Pack)

Specification	Details
Current Rating	6.0 Amperes
Voltage Rating	400V (PIV)
Diode Type	Standard Recovery
Surge Current	400A (Peak)
Package Type	R-6 (Axial)
Material	Silicon Junction

Price

🚚 Ships within 24 Hours
📦 Pan India Delivery

₹ 25.42

(Tax included)

Barcode: 43432

Product Description

The 6A4 Silicon Rectifier Diode is a high-current power component designed for robust AC-to-DC rectification and circuit protection. Rated at a significant 6 Amperes, this diode is engineered to handle much higher power loads than the standard 1N400x or 1N540x series. With a 400V Peak Inverse Voltage (PIV) rating, it is ideal for use in medium-voltage power supplies, battery chargers, and industrial control circuits. Housed in the larger R-6 axial package, the 6A4 features thick leads and a high-mass body to effectively dissipate heat during continuous high-current operation, ensuring long-term reliability in demanding environments.

Key Features

High Current Capacity: Supports up to 6A of continuous forward current, making it suitable for high-power DC motor drivers and large LED arrays.
Exceptional Surge Handling: Capable of withstanding non-repetitive peak surge currents up to 400A, protecting the system during initial power-on "in-rush."
Low Forward Voltage Drop: Designed for high efficiency, minimizing energy loss as heat even when operating near its maximum current limit.
Rugged R-6 Package: The heavy-duty axial lead construction provides superior mechanical strength and improved thermal management compared to smaller diodes.
Reliable 400V Rating: Offers plenty of headroom for 12V, 24V, 48V, and even 110V DC systems, safely blocking reverse voltage transients.

Technical Details

Mounting Style: Through-hole (Axial).
Polarity: Cathode (negative) is marked by a distinct silver/white band on the cylindrical body.
Operating Temperature: -65°C to +150°C.

Prototyping and Engineering Tips from Robogears

Thermal Management: CRITICAL: At 6 Amperes, this diode will generate noticeable heat. Do not mount it flush against the PCB. Leave a 5mm to 10mm gap between the diode body and the board to allow for airflow, and use wide copper traces to help "wick" heat away through the thick leads.
Building a High-Power Bridge: You can use four of these 6A4 diodes to create a heavy-duty bridge rectifier. This setup can comfortably power large DC actuators or high-wattage audio amplifiers that require a stable 6A DC supply.
Flyback Protection for Large Inductors: If you are switching high-power solenoids or large DC motors, the 6A4 is an excellent "Flyback" or "Freewheeling" diode. Its 400A surge rating allows it to safely absorb the massive energy spikes generated when a large magnetic coil is deactivated.
Polarity Verification: Always connect the side with the silver band (Cathode) toward the positive (+) side of the output or the load. Installing a 6A diode backward in a high-current circuit can lead to blown fuses or damage to the power source.
Lead Handling: Because the leads on the R-6 package are quite thick, use a heavy-duty plier to bend them. Avoid putting mechanical stress on the point where the lead enters the plastic body, as this can cause internal micro-cracks in the silicon junction.

Package Includes

5 x 6A4 6A 400V Silicon Rectifier Diodes

Disclaimer: Ensure the continuous current in your circuit does not exceed 6.0A. For high-frequency switching power supplies (above 10kHz), consider using an "Ultra-Fast" or "Schottky" diode, as the 6A4 is a standard recovery diode optimized for 50Hz/60Hz applications. Always verify circuit polarity with a multimeter before applying full power.