Skip to Content
  1. All products
  2. 🧬 Discrete Components
  3. 🔳 ICs, Transistors & Mosfets
  4. 74LS32 Quad 2-Input OR Gate IC (7432 IC)
  5. 🔳 ICs, Transistors & Mosfets
Pricelist: Retail Price (B2C) Pricelist
Pricelist: Retail Price (B2C) Pricelist
74LS32 Quad 2-Input OR Gate IC (7432 IC)

74LS32 Quad 2-Input OR Gate IC (7432 IC)

(0 review)
SpecificationDetails
Logic Family74LS (Low-power Schottky)
Logic TypeOR Gate
Number of Gates4 (Quad)
Number of Inputs2 per Gate
Operating Voltage4.75V to 5.25V (Standard 5V)
Output Current8mA
Package TypeDIP-14 (Through-Hole)
Price
₹ 16.95 ₹ 16.95
(Tax included)

Barcode: 90507

Product Description

The 74LS32 Quad 2-Input OR Gate IC is a fundamental digital logic component containing four independent OR gates within a single 14-pin package. Each gate performs the Boolean function $Y = A + B$, where the output is HIGH if at least one of the inputs is HIGH. Built using Low-power Schottky technology, the 74LS32 offers a high-speed logic transition with significantly lower power consumption than the original 74 series. It is an essential building block for digital electronics, used extensively in address decoding, data steering, and basic decision-making circuits in microcomputer systems and DIY robotics.

Key Features

  • Four Independent Gates: A single chip can handle four separate logical "OR" operations, saving PCB space.

  • Low Power Consumption: The "LS" series is optimized for efficiency without sacrificing switching speed.

  • TTL Compatibility: Standard 5V logic levels make it directly compatible with microcontrollers like Arduino and 8051.

  • Fast Switching: Typical propagation delay of only 15ns, suitable for high-frequency digital clock circuits.

  • Standard DIP-14 Package: Easily fits into breadboards and 14-pin IC sockets for rapid prototyping.

Technical Details

  • Propagation Delay: ~15ns.

  • Operating Temperature: 0°C to +70°C.

  • Pin Configuration: Pin 14 (VCC), Pin 7 (GND).

Prototyping and Engineering Tips from Robogears

  • The "Any High" Logic: CRITICAL: Remember that an OR gate output only goes LOW if all inputs are LOW. If you are using this to trigger an interrupt, ensure your pull-down resistors are in place so the inputs don't "float" and cause false HIGH triggers.

  • Unused Inputs: Never leave the input pins of unused gates floating. Floating pins can pick up electrical noise and cause the IC to draw excess current or oscillate. Connect unused inputs to Ground (GND).

  • Decoupling Capacitor: Digital ICs create small power spikes when switching states. Always place a 0.1µF Ceramic Capacitor between Pin 14 (VCC) and Pin 7 (GND) as close to the chip as possible to ensure stable logic levels.

  • Mixing Logic Families: While the 74LS32 works perfectly with 5V systems, if you are interfacing with a 3.3V system (like an ESP32 or Raspberry Pi), you will need a Logic Level Shifter to ensure the 5V output of the 74LS32 doesn't damage the 3.3V pins.

  • Cascading Gates: You can combine two 2-input OR gates to create a 3-input OR gate. Connect the output of the first gate to one of the inputs of the second gate. The final output will be HIGH if any of the three inputs are HIGH.

Package Includes

  • 1 x 74LS32 Quad 2-Input OR Gate IC (DIP-14)

Disclaimer: Product images are shown for illustrative purposes only. The exact branding placement or the specific manufacturer code printed on the IC may vary slightly between manufacturing batches, but all technical specifications and 74LS32 performance standards remain as described.

Safety Warning: Always verify that your power supply is exactly 5V. Voltages exceeding 7V will permanently damage the internal transistor logic. Ensure the IC is oriented correctly in the socket before applying power—refer to the notch on the plastic body to identify Pin 1.