Skip to Content
  1. All products
  2. Motors
  3. 4pcs Yellow Plastic Gear 56 Tooth + 38 Tooth + 26 Tooth + 6 Tooth Combo
  4. Motors
Pricelist: Retail Price (B2C) Pricelist
Pricelist: Retail Price (B2C) Pricelist
4pcs Yellow Plastic Gear 56 Tooth + 38 Tooth + 26 Tooth + 6 Tooth Combo

4pcs Yellow Plastic Gear 56 Tooth + 38 Tooth + 26 Tooth + 6 Tooth Combo

(0 review)
ComponentSpecification
MaterialHigh-Impact POM/ABS Plastic
Tooth Counts56T, 38T, 26T, 6T
Bore Size1.9mm (Tight fit for 2mm shafts)
Modulus0.5 M (Standard Hobby Grade)
ColorIndustrial Yellow
Gear TypeSingle & Double Layer Spur Gears
CompatibilityStandard 130/140/260 DC Motors
Quantity4 Pieces per Pack
Price
₹ 186.44 ₹ 186.44
(Tax included)

Product Description This 4-piece Yellow Plastic Gear Combo is a precision-engineered set designed for creating high-torque reduction drives in DIY robotics and mechanical models. The set includes a variety of tooth counts (56T, 38T, 26T, and 6T), allowing engineers to experiment with different gear ratios to increase output torque or decrease rotational speed. Molded from durable, low-friction plastic, these gears are specifically designed to fit tightly on standard 2mm motor shafts, ensuring efficient power transmission without slippage.

Key Features

  • Diverse tooth counts allow for multiple stages of gear reduction.

  • High-visibility yellow plastic makes mechanical inspection easier in dark enclosures.

  • Precision-molded teeth for smooth meshing and reduced mechanical noise.

  • Durable construction resistant to wear during moderate-load applications.

  • Standard 0.5 Modulus ensures compatibility with most hobbyist gear kits.

Technical Details

  • Gear 1 (Large): 56 Teeth (Double layer option usually included)

  • Gear 2 (Medium): 38 Teeth

  • Gear 3 (Small): 26 Teeth

  • Gear 4 (Pinion): 6 Teeth (Ideal for motor shaft mounting)

  • Center Hole: ~1.95mm (Press-fit for 2.0mm axles)

  • Material Weight: Lightweight yet rigid for high-speed rotation

  • Pressure Angle: Standard 20 degrees

  • Thickness: Optimized for hobby-grade gearboxes

Prototyping and Engineering Tips from Robogears

  • Calculating Ratios: To find your reduction ratio, divide the number of teeth on the "driven" gear by the teeth on the "driving" gear. For example, using the 6T pinion to drive the 56T gear gives you a nearly 9.3:1 reduction, significantly increasing your motor's lifting power.

  • Axle Alignment: Ensure your axles are perfectly parallel. If the gears are too tight, they will create friction and heat; if too loose, they may "skip" teeth under load, leading to gear stripping.

  • Stacking Gears: These gears can be stacked on a single axle to create multi-stage reductions. Use a small drop of plastic-safe cyanoacrylate (Super Glue) only if you need to lock a gear permanently to a smooth shaft.

  • RPM Limits: While durable, plastic gears can melt if run at extremely high speeds under heavy friction. Always use a tiny dab of lithium or silicone-based grease for smoother, cooler operation.

Package Includes

  • 1 x 56 Tooth Gear

  • 1 x 38 Tooth Gear

  • 1 x 26 Tooth Gear

  • 1 x 6 Tooth Pinion Gear

Disclaimer Product images are shown for illustrative purposes only and may vary from the actual product due to manufacturing changes, lighting conditions during photography, or batch updates. While we strive for accuracy, technical specifications are subject to change by the manufacturer without prior notice. Please ensure your mechanical design accounts for load-bearing limits to prevent gear tooth failure.