Skip to Content
  1. All products
  2. ⚡ Power & Management
  3. 🔌 AC To DC SMPS & Adapters
  4. 12V 10A DC SMPS Adapter Plastic Body
  5. 🔌 AC To DC SMPS & Adapters
Pricelist: Retail Price (B2C) Pricelist
Pricelist: Retail Price (B2C) Pricelist
12V 10A DC SMPS Adapter Plastic Body

12V 10A DC SMPS Adapter Plastic Body

(0 review)
SpecificationDetails
Adapter TypeSMPS Power Adapter
Input Voltage100V – 240V AC
Output Voltage12V DC
Output Current10A
Maximum Output Power120W
Connector TypeDC Barrel Plug
Price
₹ 550.85 ₹ 550.85
(Tax included)

Barcode: 4145455

Product Description

This Fastener Set is the "bread and butter" of mechanical engineering for small-scale projects. The socket head design provides a low-profile yet extremely strong connection, resisting stripping even after multiple assembly and disassembly cycles. The included M3 hex nuts are precision-threaded to ensure a smooth fit without cross-threading. Whether you are assembling an acrylic robot chassis, mounting a high-torque servo, or securing a 3D-printed enclosure, these M3 bolts provide the structural integrity required for professional-grade results.

Key Features

  • High Torque Handling: Allen drive prevents "cam-out," allowing for tighter connections than standard screws.

  • Precision Metric Threading: Standard M3 x 0.5 pitch compatible with all standard standoffs and tapped holes.

  • Compact Head Profile: Ideal for use in counter-bored holes or narrow recesses where a screwdriver cannot reach.

  • Corrosion Resistance: Specially treated surface to prevent rust in standard indoor environments.

  • Easy Installation: Can be tightened with a standard 2.5mm Allen wrench or hex bit.

Technical Details

  • Head Diameter: ~5.5 mm.

  • Head Height: ~3.0 mm.

  • Strength Class: Typically 8.8 or 12.9 (High Tensile).

Prototyping and Engineering Tips from Robogears

  • Calculating Grip Length: When choosing a 6mm bolt, remember that approximately 2mm to 3mm of the thread will be occupied by the M3 nut. This makes the 6mm bolt perfect for joining two pieces of 1.5mm material together with a small amount of thread remaining for a secure lock.

  • The "Nyloc" Upgrade: If your project involves high-vibration (like a drone or a high-speed RC car), consider replacing the standard hex nuts with M3 Nylon-Insert Lock Nuts to prevent the bolts from shaking loose over time.

  • Avoid Over-Tightening in Plastic: When mounting components to 3D-printed or acrylic parts, tighten only until the bolt head is flush and firm. Over-tightening can crack acrylic or strip the "bite" out of plastic holes.

  • Thread Locking: For permanent installations, apply a tiny drop of blue thread-locker (like Loctite 242) to the threads before spinning on the nut. This ensures the assembly stays together during rigorous operation.

Package Includes

  • 2 x M3 x 6mm Socket Head Cap Allen Bolts

  • 2 x M3 Hex Nuts

Disclaimer

Always use the correct 2.5mm hex key size; using a worn-out or incorrect-sized tool can round off the internal socket. These fasteners are intended for small mechanical loads and should not be used for heavy-duty structural or automotive applications.